Hogar >
Productos >
trituradora de rodillos

trituradora de rodillos

Toothed roll crusher, also known as double toothed roll crusher, is mechanical equipment designed for crushing medium and low hardness brittle materials. It is widely used in coal mining, ore processing, metalurgia, aggregate plants and coal preparation plants. It crushes materials such as coal, coke and coal gangue by shear force generated through reverse rotation of double or four toothed rolls. This machine features large crushing ratio, uniform finished particle size and low over-crushing rate.

Feed size: 150-1000milímetros
Capacity: 100-4000t/h
Adecuado para: Coal, Coke, Coal Gangue, Caliza, Shale, Clay, Slag And Other Medium And Low Hardness Brittle Materials
Wide Material Adaptability
Hydraulic Automatic Avoidance Design
Automatic Cleaning Function
Multi-level Safety Protection

Obtener precio ahora Obtenga servicios en línea

Siempre nos centramos en optimizar la experiencia del usuario de nuestros productos

1. Wide Material Adaptability

No strict requirement on material moisture content, bajo consumo de energía, and high working efficiency.

2. Hydraulic Automatic Avoidance Design

Effectively avoid damage caused by iron blocks and flexible sundries, ensuring stable operation.

3. Automatic Cleaning Function

Remove adhered materials inside the crushing cavity automatically during idle time.

4. Multi-level Safety Protection

Complete mechanical, electrical, and hydraulic interlock protection safeguards the whole equipment system.

Principio de funcionamiento

A toothed roll crusher consists of rollers, roller bearings, a pressing device, an adjusting device, and a drive device.

The material is drawn into the gap between the rollers by the rotating motion of the rollers and the friction angle (called the meshing angle) formed between the rollers and the material. As the two rollers rotate, they compress the material into an increasingly smaller gap area, where it is crushed under the compressive force generated by the rotating rollers.

Estructura del producto

The toothed roll crusher consists of crushing rolls, an adjusting device, a spring safety device, a transmission device, and a frame.

CASOS

Indonesia Mobile Construction Waste Crushing Project

Project Overview This urban renovation project is located in Southeast Asia. With scattered construction...

Línea de molino vertical de carbón de Vietnam

Descripción general del proyecto Este proyecto se utiliza para la molienda de carbón crudo.. Finished coal powder is supplied to local...

Línea de fabricación de arena de guijarros de río de EE. UU.

Project Overview The production line takes river pebbles as raw material to produce construction sand....

Mexico Limestone Crushing Line

Project Overview Located in Mexico, this quarry project mainly processes limestone for construction aggregates....

Elige la combinación que mejor se adapte a ti

Parámetros técnicos

Roller Crusher for Primary Crushing

Series	Modelo	Tamaño de alimentación (milímetros)	Discharge Size (milímetros)	Capacity (t/h)	Installed Power (kilovatios)
F65	BSC65100	300~350	150~200	200	2×45
F65	BSC65150	300~350	150~200	400	2×75
F65	BSC65200	300~350	150~200	600	2×90
F75	BSC75100	400~500	150~200	200	2×55
F75	BSC75150	400~500	150~200	400	2×75
F75	BSC75200	400~500	150~200	600	2×110
F80	BSC80100	500~600	200~300	200	2×55
F80	BSC80150	500~600	200~300	500	2×90
F80	BSC80200	500~600	200~300	800	2×132
F80	BSC80250	500~600	200~300	1000	2×160
F95	BSC95150	800~1000	200~300	1000	2×160
F95	BSC95200	800~1000	200~300	2000	2×250
F95	BSC95300	800~1000	200~300	4000	2×315

Roller Crusher for Secondary Crushing

Series	Modelo	Tamaño de alimentación (milímetros)	Discharge Size (milímetros)	Capacity (t/h)	Installed Power (kilovatios)
S50	BSC50100	150~200	40~50	100	2×30
S50	BSC50150	150~200	40~50	200	2×45
S50	BSC50200	150~200	40~50	350	2×75
S65	BSC65100	200~250	40~50	120	2×30
S65	BSC65150	200~250	40~50	200	2×55
S65	BSC65200	200~250	40~50	350	2×75
S70	BSC70100	250~300	50~80	130	2×30
S70	BSC70150	250~300	50~80	200	2×45
S70	BSC70200	250~300	50~80	400	2×75
S75	BSC75100	300~350	50~80	150	2×37
S75	BSC75150	300~350	50~80	250	2×55
S75	BSC75200	300~350	50~80	400	2×75
S80	BSC80150	350~400	80~100	300	2×75
S80	BSC80200	350~400	80~100	600	2×110
S80	BSC80300	350~400	80~100	1000	2×200
S90	BSC90150	400~500	100~150	300	2×75
S90	BSC90200	400~500	100~150	600	2×132
S90	BSC90300	400~500	100~150	1200	2×160

PRODUCTOS CALIENTES

Impulsado por una búsqueda inquebrantable de la calidad., Dedicamos atención meticulosa a cada detalle estructural y funcional de nuestra maquinaria minera.. Estándares de fabricación avanzados, mecanizado preciso, y estrictas pruebas de calidad garantizan que cada pieza del equipo resista entornos hostiles de minería subterránea y a cielo abierto.. Entregamos robusto, Equipos de minería de alta eficiencia con rendimiento constante para proyectos globales de procesamiento de minerales.. Los detalles definen la calidad; La calidad garantiza valor a largo plazo para todos los socios mineros en todo el mundo..